DQ6000 Series

DQ6000 Series

DIGITAL STORAGE OSCILLOSCOPE

Specifications

Features
. 500MSa/s~1GSa/s sampling rate
. 7 inch wide rectangle colour LCD
. One key print screen
. 2 x 512k words per channel record length
. FFT function
. Auto-setting for quick setup and waveform acquisition
. Advanced cursor modes: manual, auto and track

analog oscilloscope basics
analog oscilloscope manual

digital oscilloscope 100mhz

TechnicalData DQ6025 DQ6052 DQ6052E DQ6102E
Display
Type 7" rectangle color LCD
Backlight intensity 300cd/m2
Display resolution 400 horizontal × 240 vertical pixels
Display contrast Adjustable
VERTICAL SYSTEM
Sensitivity and accuracy 1mV / DIV~20V / DIV
Vertical resolution 8 bit
Width of band (-3dB) 25MHz 50MHz 50MHz 100MHz
Rise time ≤14ns ≤7ns ≤7ns ≤3.5ns
Sing-shot band width 25MHz 50MHz 50MHz 100MHz
Input coupling DC , GND , AC
DC gain accuracy ±5% (1mV/DIV~2mV/DIV), ±4% (5mV/DIV) ±3% (10mV/DIV~20mV/DIV)

Delta voltage Measurement accuracy

±(3%Rdg+0.05DIV)
HORIZONTAL SYSTEM
SEC/DIV range 10ns~50s/DIV 5ns~50s/DIV 2ns~50s/DIV 2ns~50s/DIV
Sampling rate range 500M Sa/s 500M Sa/s 1G Sa/s 1G Sa/s
Wave forn interplation (Sinx)/x
Record length 2 x 512k/channel
Memory length 25k (12.5k per channel)
Sampling rate and delay Time accuracy ±100ppm over any ≥1mS time interval
Delta time Measurement accuracy Single ± (1 sampling interval time+ 100ppm x rdg +0.6ns)
Average ± (1 sampling interval time+ 50ppm x rdg +0.4ns)
TRIGGER SYSTEM

Acquisition Mode

AUTO, Normal, Single
Type Edge,TV, pulse, Width
Hold Off Range 80ns~1.5s
MATH +, -, ×, ÷
FFT
ACQUIRE INPUT
Input couping DC、AC or GND
Input impedance 1MΩ±2% 20pF±3pF
Probe attenuation 1x、10x、100x、1000x
Max.input voltage 400V (DC + AC peak) at 1KHz or less
Channel CMR Better than 40:1
Channel isolation Better than 40:1
DISPLAY
Persist time 1s, 2s, 5s
STORAGE Waveform, Setup, Bit
RECORDER Record, Replay
MEASUREMENT
Cursor Voltage difference△(V) between cursors
Time difference(△T) between cursors
Reciprocal of △T in Hz (1/△T)
AUTO-Mesure Vrms, Vavg, Vp-p, Vmax, Vmin, Vtop, Vhigh, Vlow, Vmid, Vamp;
period, Freq, Rise, Fall, +Width, +Duty, -Duty, Delay
I/O
Standard USB OTG
CALIBRATOR SIGNAL
Output Voltage 3V (≥1MΩ load)
Output Frequency 1 kHz
POWER SOURCE 100/240VACrms, 45Hz~440Hz, 50VaMax; CAT II
ACCESSORIES One operation manual,Power cord, USB cable, probe2, Software CD-ROM
DIMENSIONS & WEIGHT 306(W) x 147(H) x 122(D)mm, 2.2kg


You might also like

Just say hello and leave your messages!